A square of side $L$ metres lies in the $x y$-plane in a region, where the magnetic field is given by $\mathbf{B}=B_0(2 \hat{\mathbf{i}}+3 \hat{\mathbf{j}}+4 \hat{\mathbf{k}}) \mathrm{T}$, where $B_0$ is constant. The magnitude of flux passing through the square is

A loop, made of straight edges has six corners at $A(0,0,0), B(L, 0,0)$, $C(L, L, 0), D(0, L, 0), E(0, L, L)$ and $F(0,0, L)$. A magnetic field $\mathbf{B}=B_0(\hat{\mathbf{i}}+\hat{\mathbf{k}}) \mathrm{T}$ is present in the region. The flux passing through the loop $A B C D E F A$ (in that order) is

A cylindrical bar magnet is rotated about its axis. A wire is connected from the axis and is made to touch the cylindrical surface through a contact. Then,

There are two coils $A$ and $B$ as shown in figure. $A$ current starts flowing in $B$ as shown, when $A$ is moved towards $B$ and stops when $A$ stops moving. The current in $A$ is counter clockwise. $B$ is kept stationary when $A$ moves. We can infer that

Same as problem 4 except the coil $A$ is made to rotate about a vertical axis (figure). No current flows in $B$ if $A$ is at rest. The current in coil $A$, when the current in $B($ at $t=0)$ is counter-clockwise and the coil $A$ is as shown at this instant, $t=0$, is

The self inductance $L$ of a solenoid of length $l$ and area of cross-section $A$, with a fixed number of turns $N$ increases as

A metal plate is getting heated. It can be because

An emf is produced in a coil, which is not connected to an external voltage source. This can be due to

The mutual inductance $M_{12}$ of coil 1 with respect to coil 2

A circular coil expands radially in a region of magnetic field and no electromotive force is produced in the coil. This can be because

Consider a magnet surrounded by a wire with an on/off switch $S$ (figure). If the switch is thrown from the off position (open circuit) to the on position (closed circuit), will a current flow in the circuit? Explain.

A wire in the form of a tightly wound solenoid is connected to a DC source, and carries a current. If the coil is stretched so that there are gaps between successive elements of the spiral coil, will the current increase or decrease? Explain.

A solenoid is connected to a battery so that a steady current flows through it. If an iron core is inserted into the solenoid, will the current increase or decrease? Explain.

Consider a metal ring kept on top of a fixed solenoid (say on a cardboard) (figure). The centre of the ring coincides with the axis of the solenoid. If the current is suddenly switched on, the metal ring jumps up. Explain

Consider a metal ring kept (supported by a cardboard) on top of a fixed solenoid carrying a current $I$ (see figure of Question 14). The centre of the ring coincides with the axis of the solenoid. If the current in the solenoid is switched off, what will happen to the ring?

Consider a metallic pipe with an inner radius of 1 cm . If a cylindrical bar magnet of radius 0.8 cm is dropped through the pipe, it takes more time to come down than it takes for a similar unmagnetised cylindrical iron bar dropped through the metallic pipe. Explain.

A magnetic field in a certain region is given by $\mathbf{B}=B_0 \cos (\omega t) \hat{\mathbf{k}}$ and $a$ coil of radius a with resistance $R$ is placed in the $x-y$ plane with its centre at the origin in the magnetic field (figure). Find the magnitude and the direction of the current at $(a, 0,0)$ at

$$t=\frac{\pi}{2 \omega}, t=\frac{\pi}{\omega} \text { and } t=\frac{3 \pi}{2 \omega}$$

Consider a closed loop $C$ in a magnetic field (figure). The flux passing through the loop is defined by choosing a surface whose edge coincides with the loop and using the formula $\phi=\mathbf{B}_1 d \mathbf{A}_1, \mathbf{B}_2 d \mathbf{A}_2 \ldots .$. . Now, if we choose two different surfaces $S_1$ and $S_2$ having $C$ as their edge, would we get the same answer for flux. Justify your answer.

Find the current in the wire for the configuration shown in figure. Wire $P Q$ has negligible resistance. $B$, the magnetic field is coming out of the paper. $\theta$ is a fixed angle made by $P Q$ travelling smoothly over two conducting parallel wires separated by a distance $d$.

A (current versus time) graph of the current passing through a solenoid is shown in figure. For which time is the back electromotive force $(u)$ a maximum. If the back emf at $t=3 \mathrm{~s}$ is $e$, find the back emf at $t=7 \mathrm{~s}, 15 \mathrm{~s}$ and 40 s. $O A, A B$ and $B C$ are straight line segments.

There are two coils $A$ and $B$ separated by some distance. If a current of $2 A$ flows through $A$, a magnetic flux of $10^{-2} \mathrm{~Wb}$ passes through $B$ (no current through $B$ ). If no current passes through $A$ and a current of 1 A passes through $B$, what is the flux through $A$ ?

A magnetic field $\mathbf{B}=B_0 \sin (\omega t) \hat{\mathbf{k}}$ covers a large region where a wire $A B$ slides smoothly over two parallel conductors separated by a distance $d$ (figure). The wires are in the $x-y$ plane. The wire $A B$ (of length $d$ ) has resistance $R$ and the parallel wires have negligible resistance. If $A B$ is moving with velocity $v$, what is the current in the circuit. What is the force needed to keep the wire moving at constant velocity?

A conducting wire $X Y$ of mass $m$ and negligible resistance slides smoothly on two parallel conducting wires as shown in figure. The closed circuit has a resistance $R$ due to $A C$. $A B$ and $C D$ are perfect conductors. There is a magnetic field $\mathbf{B}=B(t) \hat{\mathbf{k}}$

(i) Write down equation for the acceleration of the wire $X Y$.

(ii) If $\mathbf{B}$ is independent of time, obtain $v(t)$, assuming $v(0)=u_0$

(iii) For (ii), show that the decrease in kinetic energy of $X Y$ equals the heat lost in .

$O D B A C$ is a fixed rectangular conductor of negligible resistance ( $C O$ is not connected) and $O P$ is a conductor which rotates clockwise with an angular velocity $\omega$ (figure). The entire system is in a uniform magnetic field $\mathbf{B}$ whose direction is along the normal to the surface of the rectangular conductor $A B D C$. The conductor $O P$ is in electric contact with $A B D C$. The rotating conductor has a resistance of $\lambda$ per unit length. Find the current in the rotating conductor, as it rotates by $180^{\circ}$.

Consider an infinitely long wire carrying a current $I(t)$, with $\frac{d I}{d t}=\lambda=$ constant. Find the current produced in the rectangular loop of wire $A B C D$ if its resistance is $R$ (figure).

$A$ rectangular loop of wire $A B C D$ is kept close to an infinitely long wire carrying a current $I(t)=I_0(1-t / T)$ for $0 \leq t \leq T$ and $I(0)=0$ for $t>T$ (figure.). Find the total charge passing through a given point in the loop, in time $T$. The resistance of the loop is $R$.

A magnetic field $\mathbf{B}$ is confined to a region $r \leq a$ and points out of the paper (the $z$-axis), $r=0$ being the centre of the circular region. A charged ring (charge $=Q$ ) of radius $b, b>a$ and mass $m$ lies in the $x-y$ plane with its centre at the origin. The ring is free to rotate and is at rest. The magnetic field is brought to zero in time $\Delta t$. Find the angular velocity $\omega$ of the ring after the field vanishes.

A rod of mass $m$ and resistance $R$ slides smoothly over two parallel perfectly conducting wires kept sloping at an angle $\theta$ with respect to the horizontal (figure). The circuit is closed through a perfect conductor at the top. There is a constant magnetic field B along the vertical direction. If the rod is initially at rest, find the velocity of the rod as a function of time.

Find the current in the sliding rod $A B$ (resistance $=R$ ) for the arrangement shown in figure. $B$ is constant and is out of the paper. Parallel wires have no resistance, $v$ is constant. Switch $S$ is closed at time $t=0 .$

Find the current in the sliding rod $A B$ (resistance $=R$ ) for the arrangement shown in figure. B is constant and is out of the paper. Parallel wires have no resistance, $\mathbf{v}$ is constant. Switch $S$ is closed at time $t=0$.

A metallic ring of mass $m$ and radius $l$ (ring being horizontal) is falling under gravity in a region having a magnetic field. If $z$ is the vertical direction, the $z$-component of magnetic field is $B_z=B_0(1+\lambda z)$. If $R$ is the resistance of the ring and if the ring falls with a velocity $v$, find the energy lost in the resistance. If the ring has reached a constant velocity, use the conservation of energy to determine $v$ in terms of $m, B$, $\lambda$ and acceleration due to gravity $g$.

A long solenoid $S$ has $n$ turns per meter, with diameter $a$. At the centre of this coil, we place a smaller coil of $N$ turns and diameter $b$ (where $b< a$ ). If the current in the solenoid increases linearly, with time, what is the induced emf appearing in the smaller coil. Plot graph showing nature of variation in emf, if current varies as a function of $m t^2+C$.