ExamGOAL
Books
PreviousNext
4
MCQ (Single Correct Answer)

An ideal gas undergoes cyclic process ABCDA as shown in given p-V diagram. The amount of work done by the gas is

A
$6 p_0 V_0$
B
$-2 p_0 V_0$
C
$+2 p_0 V_0$
D
$+4 p_0 V_0$
5
MCQ (Single Correct Answer)

Consider two containers $A$ and $B$ containing identical gases at the same pressure, volume and temperature. The gas in container $A$ is compressed to half of its original volume isothermally while the gas in container $B$ is compressed to half of its original value adiabatically. The ratio of final pressure of gas in $B$ to that of gas in $A$ is

A
$2^{\gamma-1}$
B
$\left(\frac{1}{2}\right)^{\gamma-1}$
C
$\left(\frac{1}{1-\gamma}\right)^2$
D
$\left(\frac{1}{\gamma-1}\right)^2$
6
MCQ (Single Correct Answer)

Three copper blocks of masses $M_1, M_2$ and $M_3 \mathrm{~kg}$ respectively are brought into thermal contact till they reach equilibrium. Before contact, they were at $T_1, T_2, T_3\left(T_1>T_2>T_3\right)$. Assuming there is no heat loss to the surroundings, the equilibrium temperature $T$ is ( $s$ is specific heat of copper)

A
$T=\frac{T_1+T_2+T_3}{3}$
B
$T=\frac{M_1 T_1+M_2 T_2+M_3 T_3}{M_1+M_2+M_3}$
C
$T=\frac{M_1 T_1+M_2 T_2+M_3 T_3}{3\left(M_1+M_2+M_3\right)}$
D
$T=\frac{M_1 T_1 s+M_2 T_2 s+M_3 T_3 s}{M_1+M_2+M_3}$
7
MCQ (Multiple Correct Answer)

Which of the processes described below are irreversible?

A
The increase in temperature of an iron rod by hammering it
B
A gas in a small container at a temperature $T_1$ is brought in contact with a big reservoir at a higher temperature $T_2$ which increases the temperature of the gas
C
A quasi-static isothermal expansion of an ideal gas in cylinder fitted with a frictionless piston
D
An ideal gas is enclosed in a piston cylinder arrangement with adiabatic walls. A weight $w$ is added to the piston, resulting in compression of gas
8
MCQ (Multiple Correct Answer)

An ideal gas undergoes isothermal process from some initial state $i$ to final state $f$. Choose the correct alternatives.

A
$d U=0$
B
$d Q=0$
C
$d Q=d U$
D
$d Q=d W$
PreviousNext